Xerox Nuvera™ 200/288 MX Perfecting Production System
Especificações

Xerox Nuvera™ 200/288 MX Perfecting Production System

Desempenho

Velocidade nominal
Xerox Nuvera 288MX:
  • 288 ipm (duplex A4/8.5" x 11"
  • 144 ipm (duplex A3/11" x 17"
Xerox Nuvera 200MX:
  • 200 ipm (duplex A4/8.5" x 11")
  • 120 ipm (duplex A3/11" x 17")
Resolução
Print: 4800 x 600 dpi
RIP: 1200 x 1200 dpi
Volume médio mensal recomendado
  • Xerox Nuvera 288MX: 3,000,000 images per month
  • Xerox Nuvera 200MX: 2,400,000 images per month
  • Ciclo de trabalho
  • Xerox Nuvera 288MX: up to 7,800,000 images per month
  • Xerox Nuvera 200MX: up to 6,000,000 images per month
  • Lineaturas
    85, 106, 125, 134, or 156 lpi

    Capacidades

    Standard
    Impressão MICR de produção
    Faces impressas
    Duplex
    MICR
    Sim

    Tecnologia

    PDLs (Linguagem de Impressão)
    TIFF/PCL 5e & PCL6/ASCII-standard Adobe PDF; Adobe PostScript Level 3; Multi-page TIFF; PPML; LCDS/Metacode; IPDS
    Interfaces de Rede
  • Ethernet interface (10/100BaseT; 1 GB)
  • S/370 or S/380 Bus and Tag (optional)
  • Interface de Utilizador
    19" colour flat panel monitor (attached), USB keyboard, USB mouse
    CPU
    3.0 GHz Dual Core Processor (optional second dual core processor with additional 4 GB memory)
    Memória
    4 GB (optional second dual core processor with additional 4 GB memory)
    Disco rígido
    160 GB SATA
    Second Hard Drive: 1 TB SATA (optional)

    Alimentação de Papel

    Entrada de papel
    up to 3 feed modules (2 or 4 paper trays per module), plus an optional post-print insertion module
    Capacidade de papel standard
    3,200 or 5,800 sheets per module
    • Standard sheet feed module (4-tray): 5,800 sheets
    • Oversized high capacity sheet feed module (2-tray): 3,200 sheets
    Dimensões do papel - mínimas
    140 mm x 203 mm
    Dimensões do papel - máximas
    320 x 470 mm
    Gramagens dos suportes - mínima
    Coated: 90 gsm
    Uncoated: 52 gsm
    Gramagens dos suportes - máxima
    Coated: 140 gsm
    Uncoated: 250 gsm
    Tipos de suportes de impressão
    Coated: gloss, silk, matte
    Uncoated: book, text, bond, cover, bristol, index offset
    Specialty: tabs, envelopes, carbonless, preprinted offset forms

    Entrada

    Alimentador de alta capacidade
    Standard Four-tray Sheet-feed Module: 5,800 sheets
    Oversized high capacity sheet feed module: 3,200 sheets, up to 320 x 470 mm
    Outras opções de entrada
    Post-print Four-tray Paper Insertion Module: 5,800 sheets
    Post-print Oversized Two-tray Paper Insertion Module: 3,200 sheets

    Finalização

    Finalizador
  • Basic Finisher Module: 3,000 sheet stacker, offset between sets or jobs. 1 or 2 staples, up to 100 sheets
  • Basic Finisher Module Plus: Used in addition to Basic Finisher Module, stacks up to 3,000 additional sheets, 1 or 2 staples, up to 100 sheets
  • Basic Finisher Module-DC (Direct Connect): Provides DFA (Document Finishing Architecture) to enable direct connection to several center-registered in-line finishing devices such as the Xerox Tape Binder, C.P. Bourg (Watkiss) PowerSquare™ 200, and CEM DocuConverter™
  • Encadernação com fita
    Encadernador de Fita Xerox
    Slitter/Merger
    CEM DocuConverter™
    Empilhador
    Xerox DS3500 Stacker

    Controladores de impressão

    DFEs
    Xerox FreeFlow™ Print Server

    Ambiente

    Requisitos eléctricos
    Dual 187-240 VAC (nominal), 50 Amp, 50/60 Hz
    DS3500 and DFA Finishers require additional line service and power
    Optional modules require standard 100-240 VAC, 50/60 Hz line service
    Dimensões
    Print Engine: W: 2229 mm; D: 737 mm; H: 1565 mm
    Sheet Feed & Insertion Module: W: 805 mm; D: 711 mm; H: 1133 mm
    Sheet Enhancement Module: W: 381 mm; D: 711 mm; H: 1054 mm
    Basic Finisher Module: W: 838 mm; D: 711 mm; H: 1133 mm
    Basic Finisher Module Plus: W: 1233 mm; D: 711 mm; H: 1133 mm
    Finishing Transport Module: W: 904 mm; D: 711 mm; H: 1176 mm