Emptying the Hole Punch Waste Container
The press displays a message when hole punch waste container is full. When the message appears, empty the container of all paper scraps.
Important:
• Before you perform this procedure, ensure that the press is not running.
• When you empty the container, keep the press powered on. If the press is powered off, it does not recognize that the container was emptied, and the full message remains displayed.
• To ensure that the press continues running after you empty the container, close the finisher front cover.
1. Open the finisher front cover.
2. Pull out the R4.
3. Discard all waste from the container.
Important:
Be sure to completely empty the container. If any waste or scraps remain, the container becomes full before a full message displays causing a fault to occur.
Be sure to completely empty the container. If any waste or scraps remain, the container becomes full before a full message displays causing a fault to occur.
4. Return R4 to its original position.
5. Close the finisher front cover.