Paper Feed Performance in Trays 8 and 9
If misregistration or skew occurs on printed output that was fed from Trays 8 or 9, manual adjustment of the paper-feed levers may improve and correct the printed output.
Important:
For most print jobs, these levers should remain in their default position. The position of these levers should be changed only if there is a skew problem when running a specific print job or media type. Changing the levers may cause more skew problems when running certain media types such as coated, label, tab stock, hole-punched paper, transparency, film, postcards, and envelopes.
For most print jobs, these levers should remain in their default position. The position of these levers should be changed only if there is a skew problem when running a specific print job or media type. Changing the levers may cause more skew problems when running certain media types such as coated, label, tab stock, hole-punched paper, transparency, film, postcards, and envelopes.
The paper-feed adjustment levers are found in Trays 8 and 9. These levers are used to improve paper feed accuracy and to reduce paper skew problems.
1. Rear Paper-feed Adjustment Lever
2. Right-side Paper-feed Adjustment Lever