Loading Envelopes Without the Large Envelope Kit
1. Pull out the tray toward you until it stops.
2. Remove any paper remaining in the tray.
3. Load a bundle of about 100 envelopes and align the envelope edges in the direction shown (1). For preprinted media, load the paper with the printed side facing up. Hold the side guide by its grip, then move it to touch the edges of the envelopes lightly (2). Adjust the paper guides as needed.
4. When you load envelopes repeatedly, widen the side guide, then repeat the loading process for every bundle of about 100 envelopes. When using Postcard Kit, align the envelopes by putting your hand between the side guide and the envelopes.
Note:If the envelopes do not align, misalignment on prints or a paper feeding error can occur.
5. Move the end guide to touch the edges of the envelopes lightly. To adjust the paper guides, press in the guide release lever and move the guides carefully until they touch the edges of the envelopes lightly.