Loading Paper
Loading Paper in Trays 1, 2, and 3
Note:A paper jam may occur if a tray is opened while it is being used to feed stock.
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Extend the paper guides outward until they stop.
6. Load and align the edge of the paper against the left edge of the tray.
Paper can be loaded in the LEF or portrait, or SEF or landscape direction.
7. Adjust the paper guides by pressing in the guide releases and carefully moving the guides until they lightly touch the edges of the material in the tray.
Note:Do not load materials above the MAX line located on the guides.
8. Gently push in the tray until it comes to a stop.
The Stock Wizard opens on the print server.
9. Scan the barcode on the stock, then to set up the stock, follow the steps in the Stock Wizard.
Note:For details on setting up the stock in the Stock Wizard, refer to Scanning a Media Barcode.