Enter a name for the stock. Alphanumeric characters can be used, and symbols, with the exception of a slash.

Enter the name of the Manufacturer.

Select the appropriate stock size from the menu. If Custom is selected, enter the customer stock size information (width, height, and inches or millimeters), then select OK.

Select the stock type from the menu. If Custom is selected, enter the custom type information, select Add Type, then select Close.

Select the weight of the stock by using the scroll up and down arrows or by clicking inside the field and typing the weight.

Select the desired coating from the menu.

Select the desired color for the stock from the menu. If Custom is selected, enter the custom color information, select Add Color and Close.

Indicates the orientation of the stock in the tray.

Select None or from 2–255 tabs.

If available, select the desired number of holes from the menu. The number of holes is dependent on the hole-punched stock being used.

You can set your own valuation for stocks. The My Ratings values are retained locally on the press. To set the rating for a stock, in the My Ratings column, click one of the 5 stars.

The Last Updated column displays the most recent date and time when a stock was edited or changed.

This section allows the user to enter information about the paper, such as a brand name or job-specific information. A maximum of 256 characters is allowed.

Select this option to open and access the Advanced Stock Setup options and for more information, refer to Advanced Stock Setup.

Select this option to run test prints. For more information and instructions, refer to Test Print.