Xerox : Working With : PredictPrint Media Manager : Test Print : Using the Test Print Option from Stock Properties
Using the Test Print Option from Stock Properties
1. Perform one of the following:
◦ Copy an existing stock entry. Refer to Copying a Stock Entry
◦ Modify or edit an existing stock entry. Refer to Editing an Existing Stock in the Stock Library
2. From the Stock Properties window, modify the stock attributes as required, including entering a revised stock name, if applicable, selecting a stock size, color, and other attributes.
3. Select the Test Print button.
The test print window opens.
4. Select the desired Test Print options, including:
◦ Tray:
◦ Quantity: It is recommended that you select a quantity of 10 test prints in order to best evaluate the printed output.
◦ Sides Imaged:
▪ 1 Sided-Face Up
▪ 1 Sided-Face Down
▪ 2 Sided
◦ Long Edge Feed or Short Edge Feed:
◦ Color Mode:
▪ Black: Select this for black and white only output
▪ CMYK: Select this for color output
5. Select Start.
An Information window displays stating Test Print in Progress.
Upon completion of the test prints, the Information window closes.
6. Retrieve the test prints from the output area of the printer.
7. Review the output.
◦ If the sample output is acceptable, go the next step.
◦ If the sample output is not acceptable, repeat the previous steps until acceptable output is accomplished. If the output remains unacceptable after multiple trials, contact your Customer Support Center for further assistance.
8. Select OK to save and close the Stock Properties window.
9. Select Close to exit the Stock Library feature or Tray Properties.