Press Does Not Power On
Problem
The press does not power on.
Solution
• Ensure the power cord from the press is plugged into the power outlet or receptacle correctly.
1. If problem persists, press the main power switch inside the center front door to Off.
2. Firmly plug in the power cord.
3. Press the power switch on.
• Ensure the power switch inside the center front door is set to the On position, then at the control panel, press firmly on the Off button.
• Ensure that the power supply is 200–240 V (volts), 30A (amperes).
• Ensure that supplied power capacity is compatible with the specified maximum power consumption of the press, which is 2.8–3.1 kVA (kilo-volt-ampere).
• Check the ground fault interrupter (GFI) circuit breakers.
• If the power in your location is working properly, and you have tried the suggested solutions but the press does not power on, contact the Customer Support Center for assistance.