Finishing Devices Maintenance
Crease and Two-Sided Trimmer Maintenance
Emptying the Crease and Two-Sided Trimmer Waste Container
When the trimmer waste container is nearing the full condition, an indicator lights on the top of the Crease and Two-Sided Trimmer.
Note: The waste container can be emptied before it is full and also while the printer is running.
When the waste container reaches the full condition, the following changes occurs:
• The indicator changes from a steady lighted condition to blinking.
• A message appears on the press indicating that the waste container is full.
Perform the following steps to empty the trimmer waste container.
1. Open the lower cover of the Crease and Two-Sided Trimmer.
2. Pull out and remove the waste container.
3. Discard all waste.
Important:
Ensure that the waste container is empty. If waste or debris remains in the container, the trimmer may malfunction.
Ensure that the waste container is empty. If waste or debris remains in the container, the trimmer may malfunction.
4. To ensure that you remove all waste and debris, especially beneath the frame that is located behind the container, use the cleaning rod to remove any remaining waste from inside the trimmer.
 |  |
5. Return the cleaning rod to its original position on the inside of the lower cover.
6. Reinsert the waste container and push it in fully.
7. Close the lower cover.