Crease and Two-Sided Trimmer Troubleshooting
Crease and Two-Sided Trimmer Paper Jams
The following occurs when there is a fault, such as paper jams, open doors or covers, or a press malfunction:
• The press stops running and a fault message displays on the press touch screen.
• The message includes a graphical illustration showing the location of the fault along with a brief explanation of corrective actions for clearing the fault.
• Paper jams may occur in multiple areas of the press and any optional devices connected to the press. When this happens, the graphical illustration changes to show the multiple locations and the required corrective actions.
• Additionally, if a fault occurs with an optional device, an indicator lights on that device control panel and shows the corresponding area on the device where the fault occurred.
Always refer to the following information when clearing paper jams:
• Do not power off the press when removing paper jams.
• Paper jams can be removed with the press still powered on. When the power is turned off, all information stored to the system memory will be erased.
• Clear all paper jams before resuming print jobs.
• Do not touch components inside the press. This can cause print defects.
• Ensure that all paper jams, including any small ripped pieces of paper, are cleared before proceeding with print jobs.
• Gently remove the paper taking care not to tear it. If paper is torn, be sure to remove all torn pieces.
• After removing paper jams, close all doors and covers. The press cannot print when doors or covers are open.
• After clearing a paper jam, printing automatically resumes from the state before the paper jam occurred.
• If all paper jams are not cleared, an error message continues to display on the press touch screen. To clear any remaining jams, refer to the press touch screen for instructions and information.