Replacing the Dry Ink/Toner Waste Bottle
The dry ink/toner waste bottle collects dry ink/toner that accumulates during the printing process.
Note: When the waste bottle is full, a message displays on the press touch screen informing you to exchange the full bottle with an empty one.
1. Ensure that the press is not in operation (not running any jobs).
2. Open the center front door and locate the waste bottle.
3. Grasp the handle of the dry ink/toner waste bottle and slowly pull it halfway out of the press.
Slowly pulling out the bottle prevents any dry ink/toner from spilling.
4. Continue slowly pulling out the bottle until it is removed from the press:
a. While grasping the handle with one hand, grip the top of the bottle with the other hand.
The waste bottle may be heavy. Support the bottle with both hands to ensure that no dry ink/toner is spilled while removing the bottle.
b. Continue slowing pulling out the bottle from the press until it is completely removed.
CAUTION: Never use a vacuum cleaner when cleaning up any spilled dry ink / toner. Use a broom or a cloth moistened with a neutral detergent.5. Place the full waste bottle into the plastic bag provided with the bottle.
6. Remove a new, empty waste bottle from the packaging.
7. Hold the center part on the top of a new bottle and insert it gently into the press until it comes to a stop.
8. Close the center front door.
Note: After you replace the dry ink/toner waste bottle, the system automatically resets the High Frequency Service Item (HFSI) usage counter for this CRU component to zero (0). Check the consumables Supply screen to verify the reset.