Replacing the Finisher Staple Waste Container
WARNING: To avoid personal injury, use care when removing staple waste container.The press displays a message when staple waste container is full. When the message appears, replace the container with a new one.
Important:
• Before you perform this procedure, ensure that the press is not running.
• When you replace the staple waste container, keep the press powered on. If the press is powered off, it does not recognize that the waste container was replaced, and the full message remains displayed.
• To ensure that the press continues running after you replace the waste container, close the finisher front cover.
Note: A staple waste container comes with the basic staple cartridge.
1. Open the finisher front cover.
2. Move the lock lever under R5 toward the left to the opened-lock mark.
3. Pull out R5.
4. Place the used staple waste container into the supplied plastic bag.
Note: Do not disassemble the used waste containers. Return the used staple waste containers to the Customer Support Center.
5. Insert the new staple waste container by lowering it into position and gently pushing it into place.
WARNING: To prevent injury, do not put your fingers on top of the container.
6. Move the lock lever under R5 toward the right to the closed-lock mark.
7. Close the finisher front cover.