Loading 488 mm (19.21 in.) or Smaller Paper
1. Remove the paper from the bypass tray, then open the two covers.
2. On the left of the side guides at the long edge of the paper, lower the lever. Remove any paper remaining in the tray.
3. If the end guide is stored, open the end guide shutter, then rotate the end guide to latch in the vertical position.
a. Pinch the lever and open the shutter (1).
b. Hold the paper guide and pull it up (2). Pull the paper guide toward you until it clicks in place.
c. Pinch the lever (3) and close the shutter.
CAUTION: Do not hold the paper guide clip to pull up the paper guide. The guide clip can break.4. Load 100–500 sheets of paper with the paper edges aligned in the direction shown (1). For preprinted media, load the paper with the printed side facing up. Hold the side guides by its grip, then move it to touch the edges of the paper lightly (2).
5. Load the remaining sheets into the tray, then align the paper edges in the direction shown (1). Move the end guide to touch the edges of the paper lightly (2). Adjust the paper guides by pressing in the guide release lever and carefully moving the guides until they touch the edges of the paper lightly.
6. Close the two covers.