Paper Jams in the Bypass (Tray 5)
Paper Jams When the Bypass is Installed on Trays 6 and 7
Tip:
Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared before proceeding with any print jobs.
Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared before proceeding with any print jobs.
1. Remove the paper currently loaded in the Bypass (Tray 5).
2. Lift and open the Top Cover of the Bypass (Tray 5).
3. Remove any jammed paper.
Note: If paper is torn, check inside the press and remove it.
4. Close the Top Cover of the Bypass (Tray 5).
5. Reload paper into the tray and resume printing.