Versant4100_Doc : Working With : Finishing Devices : High Capacity Stacker (HCS) : High Capacity Stacker (HCS) Components : Unloading the Stacker Tray or Cart
Unloading the Stacker Tray or Cart
Note: The HCS may be unloaded while it is running.
1. Press the Unload button on the HCS control panel.
2. After the Unload Indicator lights, open the HCS front door.
3. Position the securing bar on top of the stacked paper.
4. Pull the Stacker Cart straight out of the HCS.
5. Remove the securing bar.
6. Remove the paper from the stacker tray.
7. Push the empty Stacker Cart straight into the HCS.
8. Position the securing bar on the fixed area inside the HCS.
9. Close the front door; the tray will rise to the operate position.