Stock Wizard or Settings Tab
Important:
On Fiery® Print Server version 2.0, FS600, the Stock Wizard tab is changed to Settings tab. To find your print server version or Fiery System version, on the Fiery Command WorkStation window, go to > > > , then refer to Fiery Server or Fiery System. This information is accessible also on the Fiery configuration page, printed through Fiery® Print Server.
As an Administrator, the Stock Wizard or Settings tab allows you to make changes to the following features:
• Stock Wizard
• Guided Stock Setup
• Paper Calibration and Profiling
• Group Adjustments By (available only on Fiery® Print Server version 2.0, FS600 or newer version)
• Alignment Profile Setup
• Secondary Transfer Voltage Setup
• Other Routines
• Custom Stock Name
• Private Stock Sharing
• Stock Wizard Timeout
• PredictPrint Database
• Load Database from Device
• Automatic Image Quality System Check (available only on Fiery® Print Server version 2.0, FS600 or newer version)
• Auto Alignment + 2nd Bias Transfer Roll
• Auto Color Check