Loading Paper in Tray 5 (Bypass)

1. Slide the paper guides outward to the desired paper size.

2. Select the appropriate paper stock for your print job.

3. Open the ream of paper with the seam side facing up.

4. Fan the sheets before loading them into the tray.

5. Insert the paper or media into the tray until it stops.

The Stock Wizard opens on the print server.

6. Adjust the paper guides so that they touch the edges of the stack.

Note: Do not load materials above the MAX line located on the guides.

7. Scan the barcode on the stock, then to set up the stock, follow the steps in the Stock Wizard.

Note: For details on setting up the stock in the Stock Wizard, refer to Scanning a Media Barcode.