Producing Simple Folded Sheets with the EX and EX-P Print Servers
1. For the job, load the paper short-edge feed (SEF) into the required tray and program the stock in the PredictPrint Media Manager.
2. Submit the job to the Hold queue on the print server.
3. From the print server, double-click the job to open its Properties, and set the quantity of copies that you want to print.
4. Set all required properties for the job, such as quantity, paper size, source tray, and 1-sided or 2-sided.
5. For C and Z folds, use 8.5 x 11 in. or A4 sheets. For Engineering Z Fold (Half Z Fold), use 11 x 17 in. or A3/B4 paper.
6. Select the Finishing tab and scroll down to the Fold area.
7. Under Fold, set the fold type that you require:
a. C or Tri-fold
b. Z fold
c. Half Z fold
d. Half fold
8. Set the fold to Inside or Outside. When you select Inside, page 1 is within the fold. For Outside, page 1 is on the back of the fold.
9. If a message opens stating that the output delivery is Face down - normal order and should be Face down - reverse order, select OK to correct the setting.
10. If you want the sheets punched, under Punch, set Punch edge to Left, Right, or Top, and set Punch to 2 hole punch or 3 hole punch.
11. Select Print.
12. Collect the folded output from the top tray of the finisher or the bottom drawer of the C/Z Folder. To open the bottom drawer of the C/Z Folder, push the button on the top left of the front of the unit.