Using the Auto Adjustment Option for Secondary Transfer Voltage Adjustment
1. Perform one of the following:
2. From the Stock Properties window, select and modify the stock attributes as required, including entering a new or revised stock name, selecting a stock size, color, and other attributes.
If using the Secondary Transfer Voltage Adjustment option, customize the stock name or include information in the Comment section to identify the usage of this option. For example name the stock Custom STVAdj_Auto or add a comment stating This custom stock is using Secondary Transfer Voltage Auto Adjustment.
3. Select Advanced Setup.
The Advanced Stock Setup window opens.
4. For Secondary Transfer Voltage Adjustment, select the Auto option.
The Test Print - Secondary Transfer Voltage Auto Adjustment window opens.
5. Select the following settings:
a. Paper tray
b. Sides Imaged: Side 1 or Sides 1 and 2
c. Color Mode
d. Do not enter a Change Percentage value for either Side 1 or Side 2
6. Select Start.
The press generates 16 patches on a single test print:
• Patches 1–10 have more bias applied to them (more transfer voltage)
• Patches -1 through -5 have less bias applied to them (less transfer voltage)
• Patch 0 is the median range; this is the default value
7. Retrieve the test print from the output area of the press. Continue to the next step.
8. On the Test Print - Secondary Transfer Voltage Auto Adjustment second window, select Bias Acceptable.
The window closes and displays Advanced Stock Setup.
9. To save and close the Advanced Stock Setup window, select OK.
10. To save and close the Stock Properties window, select OK.