Optional Trimming with Fold and Crease Adjustment Profiles
The Trim and Crease selections are available only when the press is connected to the following optional devices:
• Production Ready Booklet Maker Finisher
• Crease and Two-Sided Trimmer
Tip:
For the Crease and Two-Sided Trimmer device, the trim selection is different from the trimming that occurs with the SquareFold® Trimmer module. For more information, refer to the Crease and Two-Sided Trimmer.
For the Crease and Two-Sided Trimmer device, the trim selection is different from the trimming that occurs with the SquareFold® Trimmer module. For more information, refer to the Crease and Two-Sided Trimmer.
Crease and Trim Options
The Crease and Trim options are only available with the following Fold options:
• Bi-Fold Single Sheet
• Bi-Fold Multiple Sheet
• Bi-Fold Multiple Sheets Stapled
Trim Selection
The optional Trim selection cuts the top and bottom of the media as it passes through the optional trimmer module. The trimmed media is sent to the optional Production Ready Booklet Maker Finisher for bi-folding.
Feed direction from press |  Red dotted lines represent trimming of the media. | Output to optional booklet maker finisher |
Crease Selection
The optional Crease selection applies the Crease-Bi-Fold Single Sheet to the corresponding Bi-Fold Full Adjust test print.