Bi-Fold Multiple Sheets Stapled Adjustment Procedure
Note: The Bi-Fold Multiple Sheets Stapled Adjustment feature is available with an optional finisher with a booklet maker.
1. From the PredictPrint Media Manager main window, select Profiles.
The Profiles window appears.
2. Select the Fold Adjustment tab.
The Fold Adjustment option appears.
3. Select either the New or Edit button.
If you are editing an existing fold adjustment, select the desired profile from the list and then select the Edit button.
The [New or Existing] Profile Properties window opens.
4. Type in a new name, or if desired, edit the existing name.
It is recommend that you use a name such as Single Fold Plain or something that indicates the fold type.
5. From the drop-down menu, select the Bi-Fold Multiple Sheets Stapled Fold Type.
6. Select desired settings such as Size, Coating, and Weight.
7. Select the Test Print button.
The Fold Adjustment - Test Print window displays.
8. For the Trim option, ensure that Off is selected.
Note: The Trim selection is available only when the press is connected to an optional booklet maker finisher and an optional trimmer device.
9. Select the desired tray, and then select the Start button.
When the test prints complete, the [New or Existing] Profile Properties window reopens.
Note: This screen varies depending on the selected Fold Type.
10. Obtain the printed samples from the output area of the press.
11. Measure the sample output and record the bi-fold position on a sheet of paper.
12. Select the correct the bi-fold position for the multiple stapled sheets option:
•Left Side of Fold is Longer: Use the Up and Down Arrow buttons and enter the measurement value that you obtain during the previous step in the A Length window. The left side of the fold is the one with the printed arrow on it.
•Right Side of Fold is Longer: Use the Up and Down Arrow buttons and enter the measurement value that you obtain during the previous step in the A Length window.
•Left and Right Sides are Equal
13. Select the desired staple position option:
•Left of Fold
•Right of Fold
•On the Fold
14. Use the Up and Down Arrow buttons and enter the measurement value that you obtain during the previous step in the A Length window the B Length window.
15. Use Up and Down Arrow buttons and select the desired Trim and Skew Correction settings.
Note: The Trim selection is available only when the press is connected to an optional booklet maker finisher and an optional trimmer device.
16. Run more test prints to ensure that the fold and staple positions are now correct.
a. Select the Test Print button.
b. Select the desired tray.
c. If you use the Trim or Skew Correction settings, ensure that On is selected for the Test Print Trim option.
d. Select the Start button.
e. Obtain the printed samples from the output area of the press.
f. Measure the sample output and record both bi-fold positions on a sheet of paper.
g. Select the correct the bi-fold position for the multiple sheets option.
h. Select the desired staple position option.
i. Repeat the previous steps until the desired output is achieved.
17. When the desired output is achieved, select OK to save and close the Fold Adjustment Profile.
Note: After multiple attempts, if acceptable output cannot be achieved, select OK to save and close the profile. For further assistance, contact the Customer Support Center.