Creating a New Stock from Tray Properties
Note: The option to create and save a new stock using the Stock Library is needed only when you have disabled the Stock Wizard.
1. From the PredictPrint Media Manager on the print server, select the tray where the new stock is loaded.
The Tray Stock Properties window for that tray appears.
2. Click Create New Stock.
The New Stock Setup window appears.
3. Type a new stock name and modify the attributes as required.
4. Click Advanced Setup. The Advanced Stock Setup window appears.
b. To save the changes, click OK, then close the Advanced Stock Setup window.
5. The stock is either a temporary stock or a permanent stock in the Stock Library:
•To make the stock a temporary stock, ensure that the Save In Stock Library check box is not selected.
•To permanently save the stock to the Stock Library, ensure that the Save In Stock Library check box is selected.
6. To save and close the New Stock Setup window, click OK.
7. To close the Tray Stock Properties window, click OK again.
The new stock is displayed in the Stock Library list of PredictPrint Media Manager.
Note: Before you run the job, ensure that the tray is loaded with the same stock as programmed for that tray in the Stock Library.