Test Print Button for Paper Curl Correction
Selecting the Test Print button displays a window with secondary test print options:
Tray selection
Choose a tray from the drop-down list.
Quantity
Select from 1–99.
Long Edge Feed or Short Edge Feed
Select the feed direction of the media loaded in the selected tray.
Front Print Density Level
This option is available for 1 Sided-Face Up, 1 Sided-Face Down, and 2 Sided.
• Enter the desired print (dry ink/toner) density amount as required.
• Density amount should match approximately with the image density on the target prints.
• Density amounts range from 0–70%.
• If your output is a high dry ink/toner coverage area on the output, you may want to enter a higher print density amount.
• The system default value is 10%.
Back Print Density Level
This option is available only for 2 Sided prints.
• Enter the desired print (dry ink/toner) density amount as required.
• Density amount should match approximately with the image density on the target prints.
• Density amounts range from 0–70%.
• If your output is a high dry ink/toner coverage area on the output, you may want to enter a higher print density amount.
• The system default value is 10%.