Adjusting the Paper Guides in the 550-Sheet Adjustable Trays
You can adjust the paper guides in Trays 1–4 to accommodate standard or custom paper sizes. In the standard position, the guides move into the supported standard paper settings. You can use the Paper Size Preference feature to set the preferred paper size to imperial or metric. Paper size options that use the selected units setting appear at the top of the Paper Selection list on the Print tab and User Interface. You can select from the following options of different measurement units:
• Inches: This option sets the paper-size preference to inches and displays Imperial sizes first.
• Metric: This option sets the paper-size preference to millimeters and displays Metric sizes first.
To set a custom size in the control panel, you can set the dimensions in the following increments:
• 0.1 in., if the measurement unit is set to Inches or
• 1 mm, if the measurement unit is set to Metric
To move the paper guides from the standard to the custom paper-size position:
1. Pull out the tray until it stops.
2. Remove any paper from the tray. Pinch the guide levers, then move the length or width guides outward until they stop.
3. Load the custom-size paper in the tray.
4. To engage the fine-adjustment block, pinch the levers and slide the guides inward.