Powering On the Printer or Exiting Sleep Mode
The printer has one power switch. The power switch is the Power/Wake button on the control panel. The Power/Wake button controls power to the printer electronic components, and when powering off, it initiates a software-controlled shutdown procedure. The preferred method to power on and off the printer is to use the Power/Wake button.
• To power on the printer, on the control panel, press the Power/Wake button.
• To enter or exit Sleep mode, press the Power/Wake button.
Note:
• When the printer receives data from a network connected device, the printer exits Sleep Mode automatically.
• When the printer receives data from a network print job, to reduce power consumption, only necessary electronic components exit Sleep mode automatically. The control panel does not exit Sleep Mode.
• When the printer is in Sleep Mode, the touch screen is powered off and unresponsive. To wake the printer manually, press the Power/Wake button.
• If
Auto Power Off is enabled, the printer powers off automatically after the specified conditions are met. To enable Auto Power Off mode, contact your System Administrator. For details, refer to the
System Administrator Guide at
www.xerox.com/office/VLB620docs.
WARNING: The main power outlet is at the rear side of the printer. Do not plug or unplug the power cord while the printer is powered on.