Xerox : Working With : Maintenance : Supplies : Transfer Roller Assembly
Transfer Roller Assembly
Replacing the Transfer Roller
When the transfer roller needs to be replaced, a message appears on the control panel.
*WARNING: Do not perform this procedure when the printer is copying or printing.
To replace the transfer roller:
1. Open the front door A.
Representation of opening the front door A
2. Remove the toner cartridge from the printer.
Representation of removing toner cartridge from the printer
3. Remove the imaging unit from the printer.
Representation showing remove the imaging unit from the printer
4. Remove the used transfer roller.
*CAUTION: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface of the printer to cool down before touching.
Represents the procedure of used transfer roller removal
5. Unpack and insert the new transfer roller. Refer to the installation instructions in the Transfer Roller Maintenance Kit.
Representation showing how to unpack and insert the new transfer roller
6. Insert the imaging unit straight into the printer.
Representation shows inserting the imaging unit into the printer
7. Insert the toner cartridge back into the printer.
Representation of inserting the toner cartridge into the printer
8. Close Door A.
Representation of closing Door A