Bypass Tray Feed Roller Assembly
Replacing the Feed Roller in the Bypass Tray
To replace the feed roller in the bypass tray:
1. Power off the printer, then unplug the power cord from the power supply.
2. Open the Bypass Tray. Push the release latch (1) at the front-right side of the tray.
3. If required, pull out the extension tray.
4. To release the feed roller, rotate the left end of the feed roller clockwise, as shown, then remove it from the bypass tray.
5. Unpack and insert the new feed roller in the bypass tray.
6. Close the bypass tray.
7. Connect the power cord to the power supply, then power on the printer.
CAUTION: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.