Connecting to a Wireless Network
If you have purchased the Xerox® Wireless Network Adapter, you can use the Wireless Wizard to connect the device to a wireless network. If the device is connected to a wired network, you can configure wireless settings using the Embedded Web Server or at the control panel touch screen using the Wireless Install Wizard.
Note:
Not all Xerox® Wireless Network Adapters are compatible with all Xerox® printers. Ensure that you purchase the correct Xerox® Wireless Network Adapter kit for your device. For more information, contact your Xerox representative.
For more information about installing the wireless network adapter, refer to the Xerox® Wireless Network Adapter Kit Hardware Install and Setup instructions that are included with the kit.
The device uses either the wireless or the wired network connection. Activating one network connection deactivates the other network connection.
When you switch from a wired connection to a wireless connection, the IP address of the printer changes. For more information on IP address or host name, refer to System Administrator Guide.
For details on configuring wireless network settings, refer to the System Administrator Guide at www.xerox.com/office/VLB620docs.