Xerox Nuvera™ 200/288 MX, la perfection des systèmes de production numérique
Spécifications

Xerox Nuvera™ 200/288 MX, la perfection des systèmes de production numérique

Performance

Vitesse nominale
Xerox Nuvera 288MX:
  • 288 ipm (duplex A4/8.5" x 11"
  • 144 ipm (duplex A3/11" x 17"
Xerox Nuvera 200MX:
  • 200 ipm (duplex A4/8.5" x 11")
  • 120 ipm (duplex A3/11" x 17")
Résolution
Print: 4800 x 600 dpi
RIP: 1200 x 1200 dpi
Volume mensuel moyen recommandé
  • Xerox Nuvera 288MX: 3,000,000 images per month
  • Xerox Nuvera 200MX: 2,400,000 images per month
  • Volume mensuel maximum
  • Xerox Nuvera 288MX: up to 7,800,000 images per month
  • Xerox Nuvera 200MX: up to 6,000,000 images per month
  • Trames
    85, 106, 125, 134, or 156 lpi

    Fonctions

    Fonctionnalités en standard
    Impression MICR de production
    Mode de tirage
    Recto-verso
    MICR
    Oui

    Technologie

    Langages de description de pages
    TIFF/PCL 5e & PCL6/ASCII-standard Adobe PDF; Adobe PostScript Level 3; Multi-page TIFF; PPML; LCDS/Metacode; IPDS
    Interfaces réseau
  • Ethernet interface (10/100BaseT; 1 GB)
  • S/370 or S/380 Bus and Tag (optional)
  • Interface utilisateur
    19" colour flat panel monitor (attached), USB keyboard, USB mouse
    Unité centrale
    3.0 GHz Dual Core Processor (optional second dual core processor with additional 4 GB memory)
    Mémoire
    4 GB (optional second dual core processor with additional 4 GB memory)
    Disque dur
    160 GB SATA
    Second Hard Drive: 1 TB SATA (optional)

    Gestion des supports

    Alimentation papier
    up to 3 feed modules (2 or 4 paper trays per module), plus an optional post-print insertion module
    Capacité papier standard
    3,200 or 5,800 sheets per module
    • Standard sheet feed module (4-tray): 5,800 sheets
    • Oversized high capacity sheet feed module (2-tray): 3,200 sheets
    Format support - Minimum
    140 mm x 203 mm
    Format support - Maximum
    320 x 470 mm
    Grammage - Minimum
    Coated: 90 gsm
    Uncoated: 52 gsm
    Grammage - Maximum
    Coated: 140 gsm
    Uncoated: 250 gsm
    Types de support
    Coated: gloss, silk, matte
    Uncoated: book, text, bond, cover, bristol, index offset
    Specialty: tabs, envelopes, carbonless, preprinted offset forms

    Entrée

    Magasin grande capacité
    Standard Four-tray Sheet-feed Module: 5,800 sheets
    Oversized high capacity sheet feed module: 3,200 sheets, up to 320 x 470 mm
    Autres modules d'entrée en option
    Post-print Four-tray Paper Insertion Module: 5,800 sheets
    Post-print Oversized Two-tray Paper Insertion Module: 3,200 sheets

    Finition

    Module de finition
  • Basic Finisher Module: 3,000 sheet stacker, offset between sets or jobs. 1 or 2 staples, up to 100 sheets
  • Basic Finisher Module Plus: Used in addition to Basic Finisher Module, stacks up to 3,000 additional sheets, 1 or 2 staples, up to 100 sheets
  • Basic Finisher Module-DC (Direct Connect): Provides DFA (Document Finishing Architecture) to enable direct connection to several center-registered in-line finishing devices such as the Xerox Tape Binder, C.P. Bourg (Watkiss) PowerSquare™ 200, and CEM DocuConverter™
  • Thermo-collage
    Encolleuse Xerox
    Slitter/Merger
    CEM DocuConverter™
    Bac à décalage
    Xerox DS3500 Stacker

    Contrôleurs d'impression

    Serveurs d'impression
    Xerox FreeFlow™ Print Server

    Conditions électriques et dimensions

    Alimentation électrique
    Dual 187-240 VAC (nominal), 50 Amp, 50/60 Hz
    DS3500 and DFA Finishers require additional line service and power
    Optional modules require standard 100-240 VAC, 50/60 Hz line service
    Dimensions
    Print Engine: W: 2229 mm; D: 737 mm; H: 1565 mm
    Sheet Feed & Insertion Module: W: 805 mm; D: 711 mm; H: 1133 mm
    Sheet Enhancement Module: W: 381 mm; D: 711 mm; H: 1054 mm
    Basic Finisher Module: W: 838 mm; D: 711 mm; H: 1133 mm
    Basic Finisher Module Plus: W: 1233 mm; D: 711 mm; H: 1133 mm
    Finishing Transport Module: W: 904 mm; D: 711 mm; H: 1176 mm