Xerox Nuvera™ 200/288 MX Perfecting Production System
Specifications

Xerox Nuvera™ 200/288 MX Perfecting Production System

Performance

Rated speed
Xerox Nuvera 288MX:
  • 288 ipm (duplex 8.5" x 11"/A4)
  • 144 ipm (duplex 11" x 17"/A3)
Xerox Nuvera 200MX:
  • 200 ipm (duplex 8.5" x 11"/A4)
  • 120 ipm (duplex 11" x 17"/A3)
Resolution
Print: 4800 x 600 dpi
RIP: 1200 x 1200 dpi
Recommended average monthly volume
  • Xerox Nuvera 288MX: 3,000,000 images per month
  • Xerox Nuvera 200MX: 2,400,000 images per month
  • Duty cycle
  • Xerox Nuvera 288MX: up to 7,800,000 images per month
  • Xerox Nuvera 200MX: up to 6,000,000 images per month
  • Line Screens
    85, 106, 125, 134, or 156 lpi

    Capabilities

    Standard Capabilities
    Production MICR printing
    Printed Sides
    Duplex
    MICR
    Yes

    Technology

    PDLs
    TIFF/PCL 5e & PCL6/ASCII-standard Adobe PDF; Adobe PostScript Level 3; Multi-page TIFF; PPML; LCDS/Metacode; IPDS
    Network Interfaces
  • Ethernet interface (10/100BaseT; 1 GB)
  • S/370 or S/380 Bus and Tag (optional)
  • User Interface
    19" color flat panel monitor (attached), USB keyboard, USB mouse
    CPU
    3.0 GHz Dual Core Processor (optional second dual core processor with additional 4 GB memory)
    Memory
    4 GB (optional second dual core processor with additional 4 GB memory)
    Hard Disk
    160 GB SATA
    Second Hard Drive: 1 TB SATA (optional)

    Paper Handling

    Paper sources
    up to 3 feed modules (2 or 4 paper trays per module), plus an optional post-print insertion module
    Standard paper capacity
    3,200 or 5,800 sheets per module
    • Standard sheet feed module (4-tray): 5,800 sheets
    • Oversized high capacity sheet feed module (2-tray): 3,200 sheets
    Media Dimensions - Minimum
    5.5 x 8 inches
    Media Dimensions - Maximum
    12.6 x 19.33 inches
    Media Weight - Minimum
    Coated: 90 gsm
    Uncoated: 52 gsm
    Media Weight - Maximum
    Coated: 140 gsm
    Uncoated: 250 gsm
    Media Types
    Coated: gloss, silk, matte
    Uncoated: book, text, bond, cover, bristol, index offset
    Specialty: tabs, envelopes, carbonless, preprinted offset forms

    Input

    High Capacity Feeder
    Standard Four-tray Sheet-feed Module: 5,800 sheets
    Oversized High-Capacity Sheet Feed Module: 3,200 sheets, up to 12.5" x 19.3"
    Other Input Devices
    Post-print Four-tray Paper Insertion Module: 5,800 sheets
    Post-print Oversized Two-tray Paper Insertion Module: 3,200 sheets

    Finishing

    Finisher
  • Basic Finisher Module: 3,000 sheet stacker, offset between sets or jobs. 1 or 2 staples, up to 100 sheets.
  • Basic Finisher Module Plus: Used in addition to Basic Finisher Module, stacks up to 3,000 additional sheets, 1 or 2 staples, up to 100 sheets
  • Basic Finisher Module-DC (Direct Connect): Provides DFA (Document Finishing Architecture) to enable direct connection to several center-registered in-line finishing devices such as the Xerox Tape Binder, C.P. Bourg (Watkiss) PowerSquare™ 200, and CEM DocuConverter™
  • Tape Bound
    Xerox Nuvera Tape Binder
    Slitter/Merger
    CEM DocuConverter™
    Stacker
    Xerox DS3500 Stacker

    Print Controllers

    Digital Front Ends
    Xerox FreeFlow™ Print Server

    Environmental

    Electrical Requirements
    Dual 187-240 VAC (nominal), 50 Amp, 50/60 Hz
    DS3500 and DFA Finishers require additional line service and power
    Optional modules require standard 100-240 VAC, 50/60 Hz line service
    Dimensions
    Print Engine: W: 88"; D: 29"; H: 61.6"
    Sheet Feed & Insertion Module: W: 31.7"; D: 28"; H: 44.6"
    Sheet Enhancement Module: W: 15"; D: 28"; H: 41.5"
    Basic Finisher Module: W: 33"; D: 28"; H: 44.6"
    Basic Finisher Module Plus and Basic Finisher Module-DC: W: 49"; D: 28"; H: 44.6"
    Xerox DS3500 Stacker: W: 35"; D: 28"; H: 44.75"
    Xerox Tape Binder: W: 34.1"; D: 28"; H: 42.4"