DocuPrint™ 155MX Enterprise Printing System and PowerPlus Series
Finishing and Options

DocuPrint™ 155MX Enterprise Printing System and PowerPlus Series

Finishing and Options


Feeding/Stacking/Bypass Options
Tecnau Roll Systems DocuSheeter™ DP
  • Inline roll feed system for continuous feeding of cut-sheet paper from a roll
  • Provides up to 50,000 additional sheets per roll (based on 8.5" x 11"/A4; 20 lb. Bond/75 gsm)
  • Sheets are delivered directly into the paper path
  • Sheets per roll varies based on core size, paper type (coated/uncoated, weight, caliper, etc.) and cut size
  • Reduces operator intervention and cuts paper cost
Standard Hunkeler SF4
  • Inline roll feed system for continuous feeding of cut-sheet paper from a roll (50,000 sheets) for non-stop printing
Xerox Tiltatron/Stackatron
  • Inline titled tray (for input and output)
  • Counteracts stack build-up of DocuCard forms
  • Increases effective tray capacity to 400 sheets
GBC Bypass Stacker
  • Inline bypass stacker for GBC FusionPunch II
Xerox Bypass Transport
  • Internal bypass transport needed for inline connectivity
CP Bourg Gateway ByPass
  • Inline bypass capacity from Xerox Manual+Booklet Factory to CP Bourg BDF-x Booklet Maker
CP Bourg Sheet Rotator
  • Inline sheet rotator
  • Turns paper 90 degrees
  • Required with Booklet Maker to maintain productivity when producing small booklets

Flats
Moore Wallace Pressure Sealers
  • Offline pressure seal system
  • Folds and seals documents ready for distribution
Bowe Bell & Howell Production Mail Inserters
  • Offline high speed production mail inserters
Pitney Bowes Production Mail Inserters
  • Offline high speed production mail inserters
Gunther International Mail Inserters
  • Offline high speed production mail inserters
Neopost Light Production Mail Inserters
  • Offline high speed production mail inserters

Stitched Sets
Xerox Inline Stapler
  • Inline stapler
  • Staples up to 75 pages of paper (80gsm)
  • Multiple staple positions:
    • Portrait
    • Landscape
    • Dual stitch
C.P. Bourg BDF-x Document Finisher
  • Inline booklet maker and corner edge stapler
  • Booklets round edge with up to 4 stitch heads
  • Optional square edge module available
  • Optional Cover Feeder available
Duplo DM Series Booklet Makers
  • Nearline booklet makers with stitch, fold, and face trim features
  • Automatic set-up and bar code reader options

Booklet Making
C.P. Bourg BDF-x Document Finisher
  • Inline booklet maker and corner edge stapler
  • Booklets round edge with up to 4 stitch heads
  • Optional square edge module available
  • Optional Cover Feeder available
Duplo DM Series Booklet Makers
  • Nearline booklet makers with stitch, fold, and face trim features
  • Automatic set-up and bar code reader options

Perfect Bound
Xerox® Manual+Book Factory
  • An economical binding solution for short runs (under 1,000)
  • Produces professionally finished books quickly and easily
  • Inline perfect binding system creates perfect bound books
  • Up to 4 page signatures with optional inline Challenge CMT330 three-knife trimmer
  • Available with optional CP Bourg BDFx Booklet Maker
CP Bourg BB3002 Perfect Binder
  • Offline single clamp perfect binder
  • Produces up to 600 high quality perfect bound books per hour
  • Optional digitally controlled CMT330 Three Knife Trimmer
Horizon BQ270 Perfect Binder
  • Offline production perfect binder
  • Fully-automated operation and set-up for
    • Book block dimensions
    • Glue application
    • Cover feeding, positioning, scoring

Lay Flats
GBC® FusionPunch II™
  • Docks inline to the printer, combining printing and punching into one step
  • Cost effective, professional looking finishing option
  • Hole punches sheets individually for mechanical / lay flat binding
  • 24 standard dies or custom configurations available
  • Requires Xerox Enhanced High Capacity Stacker to connect inline finishing devices
GBC DigiCoil Binder
  • Offline coil binder books up to 1.3" / 33mm
  • Handles assorted stocks, index tabs, and oversized covers

Tape Bound
Powis Parker FastBack Binders
  • Offline table-top tape binders
  • Binds large and small documents fast and easily
  • From 3 to 350 sheets
  • Optional Spine Printer

Case Bound
On Demand Machinery
  • Offline book binding equipment for case bound book production
Powis Parker FastBack Hardcover System
  • Offline table-top hardcover binding system
  • Binds 8.5 x 11 / A4 size documents in hardcover
  • Four different finishes and a variety of colors

Production Information Management System (PIMS)
The Xerox Production Information Management System (PIMS) captures, computes and displays real-time production performance for one printer or a group of printers, either on site or at multiple locations. The system provides job status, productivity metrics and machine metrics such as idle time and print time. It provides an easy way to measure performance to production goals.
  • Manages your presses' productivity
    • in real time
    • regardless of location
    • using one tool
  • Shows the productivity of each machine, customer maintenance activities, and consumable information
  • Web-based toolkit allows you to monitor key engine information to determine optimal running conditions
  • Real-time automated monitoring of multiple systems at multiple sites helps manage labor costs and operational costs
  • Immediate feedback enables changes to workflow and job loads across printers or sites when needed
Download brochure