Xerox Nuvera™ 200/288/314 Perfecting Production System
Especificações

Xerox Nuvera™ 200/288/314 Perfecting Production System

Desempenho

Velocidade nominal
Xerox Nuvera 314:
  • A4 media: 314 duplexed images per minute
  • A3 (279 x 432mm) media: 157 duplexed images per minute
Xerox Nuvera 288:
  • A4 media: 288 duplexed images per minute
  • A3 (279 x 432mm) media: 144 duplexed images per minute
Xerox Nuvera 200:
  • A4 media: 200 duplexed images per minute
  • A3 (279 x 432mm) media: 120 duplexed images per minute
Resolução
Print: 4800 x 600 dpi
RIP: 1200 x 1200 dpi
Volume médio mensal recomendado
  • Xerox Nuvera 314: 4,000,000 images per month
  • Xerox Nuvera 288: 3,000,000 images per month
  • Xerox Nuvera 200: 2,400,000 images per month
Ciclo de trabalho
  • Xerox Nuvera 314: up to 7,800,000 images per month
  • Xerox Nuvera 288: up to 7,800,000 images per month
  • Xerox Nuvera 200: up to 6,000,000 images per month
Lineaturas
85, 106, 125, 134, or 156 lpi

Capacidades

Standard
Impressão e finalização para produção
Faces impressas
Duplex
MICR
Não

Tecnologia

PDLs (Linguagem de Impressão)
TIFF, PCL6 (standard)
Adobe® PostScript® Level 3, PDF, ASCII, VIPP®/PostScript, PPML, LCDS, IPDS and and IPV6 (optional)
Interfaces de Rede
Ethernet interface (10/100BaseT; 1 GB)
IBM Bus and Tag (optional)
Interface de Utilizador
19" flat panel monitor, USB keyboard, USB mouse
CPU
3 GHz Dual Core Processor with 2 GB memory
Memória
4 GB
Disco rígido
160 GB SATA
Optional second hard drive: 1 TB SATA

Alimentação de Papel

Entrada de papel
up to 3 feed modules (4 paper trays per module), plus an optional post-print insertion module
Capacidade de papel standard
3,200 or 5,800 sheets per module
  • Standard sheet feed module (4-tray): 5,800 sheets
  • Oversized high capacity sheet feed module (2-tray): 3,200 sheets
Dimensões do papel - mínimas
140 x 203 mm
Dimensões do papel - máximas
320 x 470 mm
Gramagens dos suportes - mínima
  • Coated: 90 gsm (60 lb text)
  • Uncoated: 52 gsm (16 lb text)
Gramagens dos suportes - máxima
  • Coated: 250 gsm (90 lb cover)
  • Uncoated: 250 gsm (90 lb cover)
Tipos de suportes de impressão
  • Coated: gloss, silk, matt
  • Uncoated: book, text, bond, cover, bristol, index, offset
  • Speciality: carbonless, tabs, envelopes, never tear, preprinted offset forms

Entrada

Alimentador de alta capacidade
  • Standard Four-tray Sheet-feed Module: 5,800 sheets
  • Oversized high capacity sheet feed module: 3,200 sheets, up to 320 x 470 mm
  • Roll Feed Solution: uses DocuSheeter NV in conjunction with standard four-tray sheet-feed module
Outras opções de entrada
  • Post-print Four-tray Paper Insertion Module: 5,800 sheets
  • Post-print Oversized Two-tray Paper Insertion Module: 3,200 sheets

Saída

Bandeja Superior
250 sheets
Empilhador
  • Xerox DS-3500: 3,500 sheets, jam offset recovery/sheet-level recovery
  • Xerox Production Stacker: 2,850 sheets, unload while run with single unit, waist height delivery, jam offset recovery/sheet-level recovery

Finalização

Finalizador
  • Basic Finisher Module: 3,000 sheet stacker, offset between sets or jobs. 1 or 2 staples, up to 100 sheets
  • Basic Finisher Module Plus: Used in addition to Basic Finisher Module, Stacks up to 3,000 additional sheets, 1 or 2 staples, up to 100 sheets
  • Basic Finisher Module-DC (Direct Connect): Provides DFA (Document Finishing Architecture) to enable direct connection to several center-registered third-party in-line finishing devices
Empilhador
  • Xerox Production Stacker
  • Xerox DS3500 Stacker
  • C.P. Bourg High Capacity Elevator
Encadernador
  • Xerox® DB120-D Document Binder
  • GBC® eBinder 200™
Criador de booklets
  • CP Bourg PowerSquare 200™ Booklet Maker
  • DB120-D Booklet Maker
  • Xerox Squarefold™ Booklet Maker
  • CP Bourg BDFX Booklet Maker
  • CP Bourg Book Factory
  • Duplo DBM-5001 Inline Booklet Maker
  • Encadernação com fita
    • Xerox Tape Binder
    Perfuração
    • GBC® FusionPunch® II
    Outras opções de finalização
    Finishing Transport – Interface to Document Finishing Architecture (DFA) compliant devices, including:
    • DB120-D Booklet Maker
    • Xerox Squarefold™ Booklet Maker
    • CP Bourg BDFX Booklet Maker
    • GBC Fusion Punch
    • GBC eBinder 200
    • CP Bourg Book Factory

    Ambiente

    Requisitos eléctricos
    Dual 187-240 Vac, 50 amp, 50/60 Hz wall service
    Dimensões
    Print Engine: W: 2229 mm; D: 737 mm; H: 1565 mm
    Sheet Feed & Insertion Module: W: 805 mm; D: 711 mm; H: 1133 mm
    Sheet Enhancement Module: W: 381 mm; D: 711 mm; H: 1054 mm
    Basic Finisher Module: W: 838 mm; D: 711 mm; H: 1133 mm
    Basic Finisher Module Plus: W: 1233 mm; D: 711 mm; H: 1133 mm
    Finishing Transport Module: W: 904 mm; D: 711 mm; H: 1176 mm
    EnergyStar