Xerox Nuvera® 200/288/314 Perfecting Production System
Specifications

Xerox Nuvera® 200/288/314 Perfecting Production System

Performance

Resolution
Print: 4800 x 600 dpi
RIP: 1200 x 1200 dpi
Line screens
85, 106, 125, 134, or 156 lpi

Capabilities

Standard Capabilities
Production printing and finishing
Printed Sides
Duplex

Technology

PDLs
TIFF, PCL6 (standard)
Adobe® PostScript® Level 3, PDF, ASCII, VIPP®/PostScript, PPML, LCDS, IPDS and and IPV6 (optional)
Network Interfaces
Ethernet interface (10/100BaseT; 1 GB)
User Interface
19" flat panel monitor, USB keyboard, USB mouse
CPU
3 GHz Dual Core Processor with 2 GB memory
Memory
4 GB
Hard Disk
160 GB SATA

Paper handling

Paper sources
up to 3 feed modules (4 paper trays per module), plus an optional post-print insertion module
Standard paper capacity
3,200 or 5,800 sheets per module
  • Standard sheet feed module (4-tray): 5,800 sheets
  • Oversized high capacity sheet feed module (2-tray): 3,200 sheets
Media Dimensions - Minimum
140 x 203 mm
Media Dimensions - Maximum
320 x 470 mm
Paper Weight - Minimum
  • Coated: 90 gsm
  • Uncoated: 44 gsm
Media Weight - Maximum
  • Coated: 300 gsm
  • Uncoated: 300 gsm
Media Types
  • Coated: gloss, silk, matt
  • Uncoated: book, text, bond, cover, bristol, index, offset
  • Speciality: carbonless, tabs, envelopes, never tear, preprinted offset forms

Input

High Capacity Feeder
  • Standard Four-tray Sheet-feed Module: 5,800 sheets
  • Oversized high capacity sheet feed module: 3,200 sheets, up to 320 x 470 mm
  • Roll Feed Solution: uses SheetFeeder NV in conjunction with standard four-tray sheet-feed module
Other Input Devices
  • Post-print Four-tray Paper Insertion Module: 5,800 sheets
  • Post-print Oversized Two-tray Paper Insertion Module: 3,200 sheets

Output

Top Tray
250 sheets
Stacker
  • Xerox DS-3500: 3,500 sheets, jam offset recovery/sheet-level recovery
  • Xerox Production Stacker: 2,850 sheets, unload while run with single unit, waist height delivery, jam offset recovery/sheet-level recovery

Environmental

Electrical Requirements
Dual 187-240 Vac, 50 amp, 50/60 Hz wall service
Dimensions
Print Engine: W: 2229 mm; D: 737 mm; H: 1565 mm
Sheet Feed & Insertion Module: W: 805 mm; D: 711 mm; H: 1133 mm
Sheet Enhancement Module: W: 381 mm; D: 711 mm; H: 1054 mm
Basic Finisher Module: W: 838 mm; D: 711 mm; H: 1133 mm
Basic Finisher Module Plus: W: 1233 mm; D: 711 mm; H: 1133 mm
Finishing Transport Module: W: 904 mm; D: 711 mm; H: 1176 mm
EnergyStar