 |
|
|
|
|
|
|
|
|
| | | | | | |
| Rated speed | 135 ipm | | Resolution | 600 x 2400 dpi | | Recommended average monthly volume | 1,500,000 impressions per month | | Duty cycle | 4,000,000 impressions per month |
^ BACK TO TOP | Standard Capabilities | High-volume network printing, simplex or duplex | | Printed Sides | Duplex | | MICR | MX configuration only |
^ BACK TO TOP | PDLs | Adobe PostScript® Level 3, PDF, TIFF, HP PCL 6, ASCII, VIPP software, LCDS/Metacode (optional) | | Network Interfaces | Ethernet 10/100 BaseT, IPM Channel, TCP/IP, AppleTalk®, NetWare | | Data Backup | 18/36-track tape drive (optional) | | User Interface | Color flat panel display, keyboard, mouse | | CPU | Sun™ Blade 2500 technology | | Print Engine | Xerographic with laser raster imaging system |
^ BACK TO TOP | Paper sources | 4 | | Standard paper capacity | 6,900 sheets | | Media Dimensions - Minimum | 210 x 279 mm (A4) | | Media Dimensions - Maximum | 356 x 432 mm | | Paper Weight - Minimum | 16 lbs | | Media Weight - Maximum | 110 lbs | | Media Types | Transparencies, label stock, tab stock, carbonless paper, pre-perforated stock, safety stock, and other specialised application materials |
^ BACK TO TOP | Electronic Input | Network, CD, On-Board Storage | | Tray 1 | 1,100 sheets | | Tray 2 | 600 sheets | | High Capacity Feeder | Two feeders: 2,600 sheets each | | Optional High Capacity Feeder | Up to two additional feeders: 2,600 sheets each Lasermax Roll Systems DocuSheeter™ iG | | Other Input Devices | 178mm x 254mm enablement kit Standard Hunkler SF4 Xerox Tiltatron/Stackatron |
^ BACK TO TOP | Stacker | Two High Capacity Stackers: 2,500 sheets each | | Optional High Capacity Stacker | Up to two additional High Capacity Stackers: 2,500 sheets each | | Output Tray | Sample Tray: 100 sheets
Purge Tray: 100 sheets |
^ BACK TO TOP | Electrical Requirements | 100-240 VAC, 50-60 Hz, 12 amp | | Dimensions | System Control Module: W: 10"; D: 24"; H: 17.9"
Printer Module (including Printer Control Console): W: 77.3"; D: 35.9"; H: 55"
High Capacity Inverter Feeder/Stacker: W: 41.7"; D: 28.3"; H: 57.7" |
^ BACK TO TOP | |
