 |
|
|
|
|
|
|
|
|
| | | | | | |
| Rated speed | Xerox Nuvera 288:- 8.5" x 11" media: 288 duplexed images per minute
- 11" x 17" media: 144 duplexed images per minute
Xerox Nuvera 200:- 8.5" x 11" media: 200 duplexed images per minute
- 11" x 17" media: 120 duplexed images per minute
| | Resolution | Print: 4800 x 600 dpi
RIP: 1200 x 1200 dpi
| | Recommended average monthly volume | Xerox Nuvera 288: 3,000,000 images per monthXerox Nuvera 200: 2,400,000 images per month | | Duty cycle | Xerox Nuvera 288: up to 7,800,000 images per monthXerox Nuvera 200: up to 6,000,000 images per month | | Line Screens | 85, 106, 125, 134, or 156 lpi |
^ BACK TO TOP | Standard Capabilities | Production printing and finishing | | Printed Sides | Duplex | | MICR | No |
^ BACK TO TOP | PDLs | TIFF, PCL6 (standard)
Adobe® PostScript® Level 3, PDF, ASCII, VIPP®/PostScript, PPML, LCDS, IPDS, and IPV6 (optional) | | Network Interfaces | Ethernet interface (10/100BaseT; 1 GB)
IBM Bus and Tag (optional) | | User Interface | 19" flat panel monitor, USB keyboard, USB mouse | | CPU | Xerox FreeFlow™ Print Server | | Memory | 4 GB | | Hard Disk | 160 GB SATA
Optional second hard drive: 1 TB SATA |
^ BACK TO TOP | Paper sources | up to 3 feed modules (4 paper trays per module), plus an optional post-print insertion module | | Standard paper capacity | 3,200 or 5,800 sheets per moduleStandard sheet feed module (4-tray): 5,800 sheetsOversized high capacity sheet feed module (2-tray): 3,200 sheets | | Media Dimensions - Minimum | 5.5 x 8 inches | | Media Dimensions - Maximum | 12.6 x 19.3 inches | | Media Weight - Minimum | Coated: 60 lb text (90 gsm)Uncoated: 16 lb text (56 gsm) | | Media Weight - Maximum | Coated: 90 lb cover (250 gsm)Uncoated: 90 lb cover (250 gsm) | | Media Types | Coated: gloss, silk, matte Uncoated: book, text, bond, cover, Bristol, index, offset Specialty: carbonless, tabs, envelopes, never tear, preprinted offset forms |
^ BACK TO TOP | High Capacity Feeder | Standard Four-tray Sheet-feed Module: 5,800 sheets Oversized High-Capacity Sheet Feed Module: 3,200 sheets, up to 12.5” x 19.3” Roll Feed Solution: uses DocuSheeter NV in conjunction with standard four-tray sheet-feed module | | Other Input Devices | Post-print Four-tray Paper Insertion Module: 5,800 sheets Post-print Oversized Two-tray Paper Insertion Module: 3,200 sheets |
^ BACK TO TOP ^ BACK TO TOP | Finisher | Basic Finisher Module: 3,000 sheet stacker, offset between sets or jobs. 1 or 2 staples, up to 70 sheets Basic Finisher Module Plus: Used in addition to Basic Finisher Module, Stacks up to 3,000 additional sheets, 1 or 2 staples, up to 100 sheets Basic Finisher Module-DC (Direct Connect): Provides DFA (Document Finishing Architecture) to enable direct connection to several center-registered third-party in-line finishing devices | | Tape Bound | Xerox Nuvera Tape Binder | | Booklet Making | Bourg PowerSquare 200™ Booklet MakerDB120-D Booklet MakerXerox Squarefold™ Booklet MakerCP Bourg BDFX Booklet MakerCP Bourg Book Factory | | Cutting | CEM DocuConverter™ | | Binder | GBC E-Binder 200 | | Hole Punch | GBC Fusion Punch | | Stacker | Xerox DS5000 High Capacity Stacker | | Other Finishing Options | Finishing Transport – Interface to Document Finishing Architecture (DFA) compliant devices, including:Xerox DS5000 High Capacity StackerDB120-D Booklet MakerXerox Squarefold™ Booklet MakerCP Bourg BDFX Booklet MakerGBC Fusion PunchGBC E-Binder 200CP Bourg Book Factory |
^ BACK TO TOP | Electrical Requirements | Dual 187-240 Vac, 50 amp, 50/60 Hz wall service | | Dimensions | Print Engine: W: 88"; D: 29"; H: 61.6"
Sheet Feed & Insertion Module: W: 31.7"; D: 28"; H: 44.6"
Sheet Enhancement Module: W: 15"; D: 28"; H: 41.5"
Basic Finisher Module: W: 33"; D: 28"; H: 44.6"
Basic Finisher Module Plus: W: 49"; D: 28"; H: 44.6"
Finishing Transport Module: W: 35.6"; D: 28"; H: 46.3" |
^ BACK TO TOP | |
