 |
|
|
|
|
|
|
|
|
| | | | | | |
| Rated speed | 239 mm/sec | | Resolution | 600 x 1800 dpi (print), 600 x 600 dpi (scan) | | Recommended average monthly volume | 20,000 linear feet | | Greyscale Level | Monochrome: 1 bit, Grey: 8 bit, Colour: 24 bit | | Throughput | Up to 22 A1 per min, 11 A0 per min | | First-copy-out time | 18 seconds | | Warm-up time | Approximately 5 minutes |
^ BACK TO TOP | Standard Capabilities | Print, Copy | | Optional Capabilities | Scan Job accounting Image Overwrite | | Configurations | Printer, Copier/Printer | | Printed Sides | Simplex | | MICR | No | | Other Scanning Features | Electronic collation: 999 Turn Around Baffles (standard) Document Output Tray (optional) Right side registration | | Reduction | 25% / 400% | | Scan Image Processing Features | Maximum Document Input Size: - 914.4 mm width x 15 m (monochrome input)
- 914.4 mm width x 7.5 m (colour input)
- 914.4 mm width (image area)
Maximum Document Thickness |
^ BACK TO TOP | PDLs | Standard: HP-GL HP-GL/2 HP-RTL (HP 750C emulation), TIFF 6.0 (including LZW), JPEG, C4, CALS 1 & 2, CalComp 906/907/951/PCI, CGM (Level 1 with ATA ext.), FileNET®, NIRS/NIFF, VCGL, VRF, Versatec Data Standards (Ordered Vector, Blocked Raster, Compact Raster)
Optional: Adobe® PostScript® 3™, PDF (v1.7), DWF (v6.0), BMP, JPEG 2000, PNG, GIF, DGN | | Network Interfaces | TCP/IP, LPR | | User Interface | 15" (381 mm) full colour touch screen | | CPU | Integrated controller | | Imaging process | Xerographic LED
Organic photoreceptor | | Memory | 2 GB or better | | Hard Disk | 160 GB or better
Optional 80 GB Removable Hard Drive | | Operating System | Unix Based |
^ BACK TO TOP | Paper sources | 4 rolls, 175m
Cut sheet: single sheet up to A0, A1 and smaller up to 50 sheets
Cut sheet supports printer only with standard ISO, ANSI and ARCH sizes | | Standard paper capacity | 4 rolls, 175m | | Maximum paper capacity with options | 4 rolls, 175m | | Media Dimensions - Minimum | 216 x 279 mm | | Media Dimensions - Maximum | 915 mm x 6 m | | Media Weight - Maximum | Paper: 70gsm. and 90gsm.
Tracing: 80gsm
Film: 4 mil | | Media Types | Paper, tracing, film | | Thickness | Maximum Document Thickness: 0.5” / 12.7 mm |
^ BACK TO TOP | Tray 1 | 1 Roll, 175m | | Tray 2 | 1 Roll, 175m | | Tray 3 | 2 Rolls, 250m | | Other Input Devices | On-board scanner |
^ BACK TO TOP | Output Capacity | 20 A1 | | Catch Tray | 50 A0 | | Output Tray | Rear-exit |
^ BACK TO TOP | Cutting | Automatic (at feeder) | | Folder | Online Folder (optional) with Generic Finishing Interface | | Stacker | Optional Stacker |
^ BACK TO TOP | Digital Front Ends | Xerox FreeFlow™ Accxes Controller |
^ BACK TO TOP | Electrical Requirements | 50/60 Hz single phase, 230 +/- 10%
16 Amp | | Dimensions | Wide Format 6622 Solution with FreeFlow Accxes Controller: W 1372mm x H 940mm x D 990mm |
^ BACK TO TOP | Security Features | Image Overwrite (optional) |
^ BACK TO TOP | |
