 |
|
|
|
|
|
|
|
|
| | | | | | |
| Rated speed | High: 244 feet per minute, 1064 ipm duplex
Low: 195 feet per minute, 850 ipm duplex | | Resolution | 600 x 600 dpi | | Duty cycle | 20,000,000+ 8.5 x 11 2-up images per month |
^ BACK TO TOP | Standard | Pinless or pinfed continuous print (MICR is supported for pinfeed only) | | Printed Sides | Duplex
(Requires two DocuPrint engines for duplex operation) | | MICR | MX configuration only
(MICR is supported on the upstream engine only in a twin duplex configuration) |
^ BACK TO TOP | PDLs | Standard: Native IPDS (all AFP towers supported)
Optional: Adobe PostScript®, TIFF, PCL, PDF, ASCII via DocuSP (LCDS and AFP via Emtex) | | Network Interfaces | IBM Channel S/370 Interface; TCP/IP Ethernet 1 Gigabit; TCP/IP Token Ring; TCP/IP Ethernet 10/100 | | User Interface | 15" Full-colour touch screen graphical user interface | | CPU | Double Xeon | | Memory | 512 MB | | Hard Disk | 40 GB |
^ BACK TO TOP | Standard paper capacity | up to 16" high stack of fanfold (4,000 sheets, 28 lb) | | Media Dimensions - Minimum | Width (pinfed): 8.3", Width (pinless): 8.0", Length: 5.83" | | Media Dimensions - Maximum | Width (pinfed): 19.5", Width (pinless): 19.5", Length: 22" | | Media Weight - Minimum | 16 lbs | | Media Weight - Maximum | 42 lbs | | Media Types | pinless, pinfed, preprinted, plain, boxed fanfold forms, and roll-fed paper |
^ BACK TO TOP | Other Input Devices | Support for external third-party unwinder solutions |
^ BACK TO TOP | Electrical Requirements | 208/220/230/240 Volts |
^ BACK TO TOP | |
