The Xerox iGen3 prints a benchmark gamut of CMYK process colours, provides matching for most Pantone® colours and prints in extremely accurate registration.

To start, the press runs a wide array of stocks - from 60 gsm to 280 gsm/16lb -100lb Cover; coated or uncoated, smooth or textured; speciality stocks and labels; in a sheet as large as 364mm x 521mm (14.33" x 20.5").

Then, the press calibrates the colour between every single impression, for consistency from sheet to sheet and shift to shift. Resolution is sharp and clear, with 600 x 600 x 8-bit continuous tone input transformed into 600 x 4800 x 1 bit printing.

Finally, iGen3 delivers a sheet with a uniform, low-gloss finish that is dry and ready for bindery. The result is superior and consistent quality.

Break New Ground: Digital Opportunities

The digital technology that is in the foundation of DocuColor iGen3 may be transparent to your customers, but they will see the difference in the way you - and they - can do business.

This press was designed for longer short-run printing at more attractive cost and faster turnaround time than offset. At up to 6000 letter-size/A4 impressions per hour, and with no additional time needed for make-ready, drying, or manual collation, you can deliver the rapid turnaround time that customers are demanding. With the ability to show customers proofs printed directly on your DocuColor iGen3, you eliminate the surprises that cause expensive and disruptive delays on press.

Customers are demanding the new business of printing: more colour, just in time and shorter print runs.